Site Overlay
netgear router red light

Tactics to Get Rid of Netgear Router Red Light Issue

Netgear router red light issue has been annoying users for years. We help them resolve this issue every now and then. Are you also experiencing the red light issue with your Netgear Nighthawk router? If yes, we’ve got you covered too. In this blog, we have talked about some of the most effective troubleshooting hacks that will help you fix the red light issue and make better use of your router. So, what are you waiting for? Dig in!

How to Troubleshoot Netgear Router Red Light Issue?

Fix 1: Restart Your Netgear Router

Most of the time, technical glitches can stop your device from performing well and lead you to similar issues like the one you are currently facing. So, what to do now? Well, to get rid of technical glitches, you need to reboot your device.

Here is how you can give your Netgear Nighthawk router a restart:

  • Disconnect your Netgear Nighthawk router from the existing modem.
  • Power off your home router.
  • Unplug the router from the wall socket.
  • Wait for a few seconds.
  • Plug your router back into the wall outlet.
  • Press the Power button.
  • Reconnect your Netgear wireless router to the existing modem.

Now, check whether you are still experiencing the Netgear router red light issue. Are you? Well, in that case, take the help of the next troubleshooting hack.

Fix 2: Contact Your Internet Service Provider

A weak internet connection can force your Netgear Nighthawk router to blink red. To get the internet issue fixed, contact your Internet Service Provider.

If he says that the internet issue is not from his end, it might be because the connection between your Netgear router and modem is not stable.

Fix 3: Verify the Ethernet Connection

Did you use an Ethernet cable to connect your Netgear wireless router and the existing modem? Looks like it. Otherwise, you wouldn’t be facing the Netgear router red light issue.

To troubleshoot the issue, we recommend you get the cable you’re currently using replaced with a new one. Or consider choosing the easier method i.e. connecting your devices wirelessly.

Fix 4: Keep WiFi Interference at Bay

Another thing that you can to troubleshoot the Netgear router red light issue is to keep WiFi interference at bay. Thus, keep your router away from:

  • Cordless phones
  • Washing machines
  • Baby monitors
  • Treadmills
  • Televisions
  • Refrigerators
  • Microwave ovens
  • Mirrors
  • Fish tanks
  • Aluminum studs
  • Bluetooth speakers

Additionally, do not place your Netgear Nighthawk router in corners or near thick walls.

Fix 5: Perform Netgear Firmware Update

Performing Netgear router firmware update is the ultimate way to upgrade the performance of your device. However, if you haven’t updated the firmware of your device from weeks, you now know why you are stuck with the Netgear router red light issue.

Thus, follow the steps mentioned below and update the firmware of your device now:

  • Switch on your WiFi-enabled device.
  • Type the default web address in the URL bar.
  • Press the Enter key.
  • You will be taken to the Netgear Nighthawk login page.
  • Log in to your device using the default login credentials.
  • Go to Settings > Administration.
  • Select Firmware Update.
  • Follow the on-screen instructions.

Pro Tip: You can also update the firmware of your Netgear wireless router by using the Nighthawk application.

Fix 6: Reset Your Netgear Router

Still struggling with the Netgear router red light issue? Well, sadly, you are left with no other option than to reset your wireless device.

Restoring your device to the factory default settings is quite simple. All that it needs is a push of a button. But, in case you are doubtful about the process, here are the steps you need to follow:

  • Look for the Reset button located on your Netgear Nighthawk router.
  • Once found, press it carefully using an oil pin.
  • Wait for some time.

Important: After resetting your device, perform Nighthawk router setup from scratch.


Every light on a Netgear device has a different meaning. If the LED on your device is blinking red, then trust us, following the aforementioned steps will help you get rid of the issue. On the off chance, they don’t, get in touch with our experts. They will surely help you troubleshoot the Netgear router red light issue.

Disclaimer: is an independent information and service provider of on-demand services related to WiFi products. We are not affiliated with any third party brand unless specified. Any use of brands, trademarks, products, and services is only for referential. disclaims any sponsorship, endorsement or affiliation of or by any such third party. Our services are provided only on demand/request by users or customers.
Alexa Seleno