Hidden Tactics to Fix Netgear Router Orange Light Issue
When you turn on your Netgear Nighthawk router, the power LED is supposed to turn green. But, what if it turns orange instead? Well, then it means, you’re in trouble. But, worry not because our technical experts have got your back. In this article, we have mentioned some of the most effective tips that will help you troubleshoot the Netgear router orange light issue in no time. So, keep reading.
Fixed: Netgear Router Orange Light Issue
a) Reboot Your Nighthawk Router
Start by rebooting your Netgear Nighthawk router. Perhaps all that your device needs to get rid of the orange light issue is a restart.
In order to reboot your device, here are the guidelines you need to follow:
- Disconnect every device connected to the network of your router.
- Power off and unplug your Netgear Nighthawk router from its wall socket.
- Wait for some time.
- Plug the Netgear router back into the wall outlet and turn it on.
Check whether the LED on your device is still blinking orange. If it is, then keep reading.
b) Check the Power Supply
Chances are that your Netgear wireless router is not receiving an adequate power supply from its wall outlet. Therefore, make sure that the wall socket into which your device is plugged is not damaged.
On the off chance, it is, then either get it fixed or plug your Netgear Nighthawk router into a different wall outlet.
c) Verify the Ethernet Connection
Using a faulty Ethernet cable to connect your Netgear Nighthawk router and the existing modem? If yes, then you’ve found another reason why you’re fighting against the Netgear router orange light issue.
To troubleshoot the issue, it is recommended that you make use of a damage-free Ethernet cable to connect your devices. Also, ensure that the connection between both the devices is finger-tight.
d) Perform Netgear Firmware Update
If nothing so far helped you get rid of the Netgear router orange light issue, then that’s probably because of an outdated firmware. Therefore, consider updating the firmware of your wireless device.
To perform Netgear router firmware update, all you need to do is, access the Nighthawk router login page, go to Settings, select Firmware Update, and follow the on-screen instructions.
e) Try MAC Cloning
Performing Netgear router firmware update didn’t work in your favor either? Well, in that case, give MAC cloning a try. Here’s how to do MAC cloning on your Nighthawk router:
- Log in to your device using the Nighthawk default login credentials.
- Head over to the Settings option and click Advanced.
- Select MAC Cloning.
- Hit Apply.
- In a second or two, the changes you’ve made to your device will get saved.
Are you still struggling with the Netgear router orange light issue? Well, then, unfortunately, you are left with no other option than to reset your wireless device.
f) Reset Your Netgear Router
Here’s how to restore your Netgear Nighthawk router to the factory default settings:
- Look for the Reset button located on your Nighthawk WiFi device.
- Once found, carefully press and hold it using an oil pin.
- You can also use a paper clip or toothpick to press the Reset button.
- Wait for the Netgear router to get back to the default mode.
Once you are done with the reset process, reconfigure your Netgear Nighthawk router and verify if you are still experiencing the orange light issue.
Although with the help of the troubleshooting tips mentioned in this post, you’ll be able to fix the Netgear router orange light issue. On the off chance, you’re still struggling with the same, don’t hesitate to reach out to our technical experts for quick assistance.